Preparation for work and operation

    Data processing programs start to be carried out at voltage giving in the INKA-SPORT block.

    For this purpose it is necessary to establish the connector in a cigar lighter socket and to be convinced available input voltage on the indicator light at the connector.

    The light-emitting diode indicators of dangerous conditions light up on 1 second and then they die away when input voltage is being engaged, and the mode of LCD indication is "fuel consumption" (R=14).

    Then the choice of a display mode is carried out by influence on the multimode keys. Transitions in other modes occur according to the functional purpose of the keys in each of the modes provided in system.

    The light-emitting diode indicators of dangerous conditions, taken out on an obverse panel of the INKA-SPORT block, light up at out of corresponding conditions coordinates for limits of dangerous modes borders and die away, when safety conditions are carried out.

    Indirect measurements of the pressures are based on precision measurement of wheels rotary speeds increasing at pressure decrease and corresponding reduction of these wheels static radiuses.

    Accuracy of pressure measurements does not depend on movement speed and pavement condition.

    Possible distortions arising at wheels slippage at movement on bends, are found out algorithmically and do not influence on results of measurements.

    For switching-off the INKA-SPORT block from input voltage on long parking it is necessary to take out the connector from the cigar lighter socket.

    Information on daily run, volume of fuel consumption and instant specific expense remains in non-volatile computer's memory.