The structure of INKA-SPORT means includes four multipurpose sensors of induction type, which are established on wheels rims and brake backplates, communication cable and the block of information processing which contains a single-crystal computer, a liquid crystal display (LCD) with multimode command keys.
Cross-section on a front wheel suspension:
Designation of basic elements:
1- tire;
2- rim;
3- brake backplate;
4- brake disk;
5- stub axle;
6- sensor of induction type;
7- constant magnet;
8- wheel hub;
9- fixing bolt of the wheel.
The sensors are established on each wheel of a car, including a spare.
The sensors consist of two diametrically located constant magnets pasted in a rim and an induction coil which is established on a brake backplate by the means of a special arm.
The communication cable carries out switching of the sensors with the block of processing and information display.
The INKA-SPORT block of processing and information display.
Designation of basic elements:
1- LCD for display of condition parameters;
2- light-emitting diode indicators of dangerous conditions;
3- multimode keys of data input and control;
4- socket of the communication cable;
5- input voltage indicator;
6- connector of input voltage cable.
The INKA-SPORT block of processing and information display is established on the dashboard in a place convenient for a driver and connected to a car's onboard network by means of the connector established in a cigar lighter socket.
The sensors are connected to the block of processing and information display under a special scheme that allows suppressing completely electromagnetic hindrances from ignition distributor.
The sensors are not subject to influence of temperature change, pollution, moisture, vibrations and other factors. Their service term practically is not limited.
The sensors do not demand maintenance operation, options and resettings.